How To: Roll A Bounce House

The second thumbnail displays a General Instructional Video -- please watch.

General Info:
1. Make sure all riders, belongings and trash are out of the inflatable.

2. Switch off each blower and remove from its inflation tube or Port.

3. Open inflation tubes and zippers, making sure item deflates on itself and weight is equally distributed when flat.

4. When deflated, unfasten tethers and remove anchors. 

5. Fold opposing sides inward, making sure inflation tubes do NOT get folded in. If it's a bounce house with a slide, pull the slide onto the center of the bounce.

6. Step on the folded inflatable, opposite inflation tubes, to stomp out trapped air, repeating as necessary.

7.  Fold in half lengthwise. Continue to stomp out air until completely deflated. Place straps under inflatable.

8. Begin rolling inflatable toward inflation tubes. For larger inflatables, 1-2 people can roll while others continue to stomp out air.

9. Use the straps underneath the inflatable to tie off the roll and secure the unit in place. Check for loose or protruding extra material and tuck it away.

10. Turn the rolled unit to a standing position.  If the inflatable was used wet or rained on, let the water drain for a few minutes. Then tip it slightly to place dolly underneath. 

11.  Roll dolly underneath and carefully transport the inflatable.